1. product features:

Good toughness, chemical resistance and weather resistance, suitable for processing, good fullness.

2. Scope of application

Color steel plate, cold rolled plate, aluminum building materials, aluminum, aluminum curtain wall and other exterior coating, widely used in aluminum plate, galvanized plate, copper and other materials that are not easy to adhere.

3. storage conditions:

1, the paint storage period is half a year, after passing the inspection can still be used.

2, diluent (solvent) should be sealed and stored, it is recommended to use as soon as possible, should not be stored for too long.

3, the storage temperature of 15-30° C is suitable for dry, ventilated, cool place, away from the fire source, heat source, prevent direct sunlight. Store separately from oxidants.

4. Notes (Attentions):

1, before use, it is necessary to confirm whether the paint type, specification, quality, color and matching diluent are consistent with the match.

2, before use, it is necessary to confirm the pre-treatment method of the coated material, and the appropriate pre-treatment method must be selected for different coated materials.

3, the paint should be stirred before use, and the painting appliance should be confirmed to be cleaned.

4, the spray viscosity should be adjusted according to the different temperature of the painting environment, and the viscosity is low when the temperature is high.

5. Packing specifications:

4 litres or 20 litres /3.5KG or 18KG

6. Coating process design

Coating combination

1, a coating a baking: widely used in the workpiece structure is simple, the material condition is good, the color of the ordinary process.

2, two coating one baking: applied to the workpiece requiring full coating or material defects or bright color, and some industries special requirements of the process to use a specific primer, after the first construction without baking can be coated with top paint, and then one-time drying.

3, two coating two baking: the application range is the same as above, mainly due to production line restrictions, primer requirements grinding, and other special factors, must be dried in advance before the primer can be recoated top paint, in general, the first baking temperature can not be too high, the paint film baking to 70% dry is the best.

4, multiple painting: mainly used in some crafts, antique lighting, bicycle frame, etc., the construction process is basically the same as 2.3 can be selected according to the actual situation.

Note: In the three combinations of 234, special attention should be paid to the matching combination of each coating, so as not to affect the adhesion between the coating films.

7. Performance technical indicators