1. Product characteristics
It has the characteristics of strong wear resistance and weather resistance, easy operation and application, and wide application range. Can be used for acrylic, polycarbonate, styrene, ABS.AS, soft, hard polyvinyl chloride, brand plate, new vinyl steel plate and other substrates.
2. construction method:
Dilution: Please use our corresponding diluent to adjust the printing viscosity
Drying time: 15 to 30 minutes at room temperature
Generally, printing can be done by adding 1525% dilution solvent to the ink to adjust the viscosity suitable for printing.
Cleaning: Please use the above solvent or SS cleaning agent to clean the board
3. Parameter characteristics
Friction resistance: When strong friction resistance is required (such as the printing of polyscratch vinyl bottles), additive 100 can be added to the ink and used in less than 5%.
Transparency: When transparent printing is required, please refer to the attached table to select the ink with good transparency. Adding ink mixing oil can increase the transparency of ink.
Fine line printing: When fine printing or dot printing is needed, a slow drying agent of 5% to 15% can be added to the ink to keep the smooth pattern lines and dot without deformation.
Pilot project | Test condition | Test result |
Adhesive force | Hundred grid method, 3M610 adhesive strip | non-stripping |
Water resistance | After soaking in room temperature water (20℃) for 24 hours, the appearance and adhesion of the film were observed | No abnormalities |
Alcohol tolerance | With the friction testing machine, alcohol soaked cotton cloth, load 500 grams weight back and forth test 200 times | non-stripping |
Acid resistance | After soaking in 5% hydrochloric acid for 24 hours, the appearance and adhesion of the film were observed | No abnormalities |
Perspiration resistance | Wet cotton cloth with artificial sweat on an abrasion tester. The load is 500 grams and the code is tested 200 times | non-stripping |
Oil resistance | Moisten cotton cloth with oil on abrasion tester. Load 500 grams weight back and forth test 200 times | non-stripping |